Congratulations on your choice of the Bronica SQ-A single lens reflex Although instructions following are based on a standard combination consisting of the. View and Download BRONICA SQ-A manual online. SQ-A Digital Camera pdf manual download. View and Download Zenza Bronica SQ-A instructions manual online. Zenza Bronica SQ-A Single lens Reflex Camera. SQ-A Film Camera pdf manual download.
|Published (Last):||4 July 2018|
|PDF File Size:||2.71 Mb|
|ePub File Size:||9.3 Mb|
|Price:||Free* [*Free Regsitration Required]|
This camera switches to 4x LR44 batteries that are held by a battery holder. All shutter speeds can be used with auto-winding also possible with finders having built-in ex posure meters. Exclusive film backs for each film type. Therefore, move the mode selector switch to OFF, check for the cause of the overload and rectify it. In the SQ-A was released with mirror lockup and a new view finder system now supporting auto exposure.
After loading the fresh film spool properly, draw out the leading end of the film and turn it across the film pressure plate as illustrated. Then, move the screen removal levers on both sides in the arrow-indicated directions, as illustrated.
User Guide for Zenza Bronica Camera, Free Instruction Manual
Lens mount Exclusive four-claw Nronica SQ bayonet mount. Then, gently lower the finder and, when well-seated, slide forward until it locks. And, following shots will, of course, be normal. For examples, “8S” is 8 sec.
Shutter speeds usable All shutter speeds can be used with auto-winding also possible with finders having built-in ex posure meters. Helical focusing system built into each lens. However, it will be possible to rotate the manual film winder and, therefore, it should be rotated 2 or 3 times more, in order to take up brnoica slack in the loaded film.
Bronica SQ A instruction manual, user manual, PDF manual, free manuals
Exposure compensation is also on the newer SQ-i backs. It has also been developed as a complete modular “system” camera, with a. Film Type Indicator Frame 7. Color and black-and-white, in different film speeds, can be shot, as required. The shutter will be mechanically Facts about the Battery “There should be no slack in the strap between the buckle and the plastic ring cover, or in “A” section, which means that both straps must be of the same length at this point.
Unlike the older Bronica models, when the film back is detached from the body the dark slide can still be removed. Attachment and Removal of Film Backs If winding is not possible, all preparations for taking pictures have been completed.
The red-colored line, next to the orange-colored distance index, is the infrared index. Depth of Field Table F-num- Meters bers oo 10 5 3 2 1. The Zenza Bronica SQ-A has been designed to take full advantage of the square 6cm x 6cm medium format.
Same when exposure counter is between “S” and “1 “.
Bronica SQ-A Instruction Manual
Observe that the cocking pin colour is green on both the lens and body before attaching or removing the lens. Use a R filter or equivalent with an infrared black-and white film. The battery holder must be left inside the battery chamber even when taking power from an external source. Continuous shooting is pos sible if sufficient preloaded film backs are available.
The drive button is used to set the loaded film to the first frame to be exposed, after it is aligned to the start-mark, to advance the film for multiple exposures, etc. Seal the exposed film and return it to its original box until development. Also OTF metering is possible. The left-side shaft of spool holder can be opened by pushing the fresh film spool outward in the arrow indicated A direction. The letters “S”, “12” and “24” are orange-colored while all other numbers are white.
To detach, simply depress the finder release button, while, at the same time, sliding the finder backwards where it can be taken up. Therefore, the type meeting mxnual requirements of the photographer should be chosen.
To install the focusing screen, nest the protrusion manal the rear end of the screen in a corresponding groove on the camera main body. Production of the last Bronica SQ-Ai model including lenses and accessories finished at the end of Septemberwith sales continuing until inventories were depleted .
manial Firing speed Continuous shooting or single frame exposures at the rate of 3 frames per 2 seconds ap proximately is possible with the fastest shutter speed. To store the magnifier, simply push it down until it catches. After focusing in the normal manner, re-set the distance indicated by the orange colored distance index to the infrared index, by shifting the distance ring. In general, more exposure rather than less seems to be a brnoica guide. The battery holder in which the batteries have been loaded must be inserted into the battery chamber in the arrow- direction indicated on the holder.
The film holder has an insert or frame for loading film, as well sqa- a built-in film winding mechanism. Double exposure can be prevented, in the above case, by the following methods. Loading the Battery The electronically controlled shutter will not work without loading the battery.
When there is abnormal overload on the motor during film winding operations, etc.
The film back also contains a crank, useful for setting the film start index. Otherwise, an electric shock may be received from the uncovered contact. Fully automatic Minimum focus: Comments to this Manuals Your Name. The NiCd batteries cannot be recharged inside the battery chamber but must be recharged externally and then used.
When S is set to the index, with the mirror lock-up switch lever, the lever will automatically return to N, with the next film advancing and shutter cocking action. The film will stop when it is in place for the first exposure, with the manuual counter also changing to “1 “.
Lift up the hinged flap and rotate the manual film winder on the right side of the film holder in the arrow-indicated direction. Be sure to use and store the battery correctly for obtaining optimum performance from it at all times.